-
-
Guardrail Roll Forming Machine
-
Rack Shelf Roll Forming Machine
-
Strut Channel Roll Forming Machine
-
Scaffolding Roll Forming Machine
-
Customized Roll Forming Machine
-
Door Frame Roll Forming Machine
-
Deck Floor Roll Forming Machine
-
Roof Panel Roll Forming machine
-
Roof Panel roll forming Machine
-
Corrugated Roll Forming Machine
-
Glazed Tile Roll Forming Machine
-
Double Layer Roof Panel Roll Forming Machine
-
PU Roof：Wall Panel Roll Forming Machine
-
Standing Beam Roll Forming Machine
-
Ridge Cap Roll Forming Machine
-
Down Spout Roll Forming Machine
-
Gutter Roll Forming Machine
-
-
Cable Tray Roll Forming Machine
-
CZ Purlin Roll Forming Machine
-
Fire Damper Roll Forming Machine
-
Stud and Track Roll Forming Machine
-
Roller Shutter Door Roll Forming Machine
-
Vineyard Post Roll Forming Machine
-
Metal Slitting Line
-
Cut to Length Line
-
Tube mill
-
High Frequency Carbon Steel Tube Mill
-
DB25 High-frequency Tube Welding line
-
DB32 Welding Pipe Tube Mill
-
DB50 Carbon Steel Tube Mill Line
-
DB50 Expanded 76 High Frequency Welded Tube Mill Line
-
DB76 Expanded 127 HF Straight Seam Welded Tube Mill Line
-
DB89 Welded Pipe Forming Tube Mill Machine
-
DB114 Welded Carbon Steel Tube Mill
-
DB219 ERW Welded Tube Mill
-
-
PU Sandwich Panel Line
-
Auxiliary Machine
-
APPLICATION
Solar Panel Mounting
Mounting Frames For Solar Modules:
The type of rack you need depends on where the solar panels will be mounted. Most of the time , they are either mounted on the top of a pole or on a roof. Top-of-pole mounts can be either stationary or trackersthat follow the sun's movement across the sky. Sometimes solar panels are mounted on a rack on the ground.
Tilt-up racks can be angled up off a roof's pitch to the optimal angle for your area and can be seasonally adjusted. They are more visually obtrusive than flush mount racks, but in most instances they allow the panels to produce more energy. Tilt-up racks can also be turned to face due south on a roof that faces off south, again increasing energy production. Doing this, however, does look awkward.
We usually prefer not to mount on roofs because of the potential for leaks, difficulty of maintenance and over heating. However, a roof mount is generally more secure from theft or damage, and sometimes offers the best access to the sun.
Trackers are top-of-pole mounts that use electronic sensors and motors to automatically follow the sun's path. During cloudy weather they face the brightest part of the sky to maximize the array's output. Trackers can increase an array's power production by 10-50%, and are particularly effective in array direct water pumping situations. (We no longer install or recommend passive trackers, partially due to their tendency to flop around in the wind--which we have plenty of here in the Southwest).
Related Product：Strut Channel Roll Forming Machine
Previous
Next
Previous
Next
Jiangyin Dingbo Technology Co., Ltd!
Add: Xingyuan Road, Gushan Town, Jiangyin city,Jiangsu province, China
Tel: +86-510-86952128
Website: www.dingbojx.com
